Silca Triax Pro - User Data Backup;Restore

6.10 USER DATA BACKUP/RESTORE
The WinTransfer program is used to save or restore the User Parameters edited on the machine (user cutting
cards, user data, etc...).
- Start the “WinTransfer” program and select the machine model.
- Connect a PC serial or USB cable to the key-cutting machine.
- Select the communication port (COM) and click on “TEST CONNECTION”, the machine serial number will appear
in the “Serial Number” eld.
A = button to save the machine data on the PC (user cutting cards, user data, etc....)
B = button to upload the data from the PC onto the machine (user cutting cards, user data, etc.).
Operating manual TRIAX PRO
Copyright Silca 2016
54