Simrad SX90 - INSTALLATION REV C - Preparations

SimradSX90
Thefollowingtwoproceduresmustbeperformedsimultaneously
bythepersononthebridgeandthepersoninthesonarroom:
•Actionsonthebridgeshallbeperformedonthebridge.
•Actionsinthesonarroomshallbeperformedinthesonar
room.
Tosimplifythetest,removetheapplicablepagesfromthis
manual.
Preparations
Inordertopreparethesystemstart-up,carryoutthefollowing
operationsintheTransceiverUnitandtheMotorControlUnit.
1Connectandfastenthetransducerplugtotheleft-handside
oftheTransceiverUnit.Usethescrewsandwashersapplied
fortheprotectingcover.
2Re-insertthefusesF1andF2ontheHighVoltagepower
supply.
Note
TheHighV oltagepowersupplyistheunitmountedonthe
farrightsideoftheTransceiverUnit.
3Setthehoist/lowerswitchS302intheMotorControlUnitto
Remoteposition.
120
307531/C