Simrad SX90 - INSTALLATION REV C - Connect the Video Cable from the Processor Unit to the Colour Display

SimradSX90
ConnectthevideocablefromtheProcessor
Unittothecolourdisplay
Thisisastandardcommercialcable.Itisoftenphysically
attachedtothedisplay,andterminatedinthe“computerend”
withamale15-pinDeltaconnector(VGA)oraspecialDVI
connector.ThegraphicadapterontherearsideoftheProcessor
Unitprovidestwoconnectors,oneforVGAandoneforDVI-I.
Choosetheconnectorthattsyourcable.Ifyouhavetwo
displaysbothcanbeconnectedsimultaneously,buttheywill
showthesamepicture.
Procedure
ThisiscableSX90/C10.
1
Connectthedisplaycablefromtheappropriatesloton
therearsideoftheProcessorUnittothedisplayunit.
Figure26Displaycableconnections
Relatedtopics
•VGA/SVGADisplayonpage209
•DVI–IDisplayonpage211
74
307531/C