Simrad SX90 - INSTALLATION REV C - Optional Hull Units and Installation Trunks

SimradSX90
•Hullunitsandinstallationtrunks
•Additionalfunctionality:
–Scienticinterface
–Extendedrange
•Amplierwithoneortwospeakersforaudiooutput
•Otherperipheralequipmentandsensors
Optionalhullunitsandinstallationtrunks
Hullunits
ThestandardSX92HullUnitcanbelowered1.2metersataspeed
of24knots.Themountingangehas24boltswithpitchcentre
diameter(PCD)680mm.Otherhullunitsareavailableaslisted
below.
Table1HullunitsavailablefromSimrad
HullUnit
SpecicationsOrderno.
SX901.2m,24knots,20bolts,PCD620mm
307472
SX911.6m,20knots,20bolts,PCD620mm
307474
SX92*1.2m,24knots,24bolts,PCD680mm
307476
SX931.6m,20knots,24bolts,PCD680mm
307478
SX951,0m,12knots,16bolts,PCD540mm
310279
(*=SX92isthestandardhullunit)
Note
TheSimradSX90andSimradSX91hullunitsandtrunksare
discontinued.Theyareonlydeliveredonspecialorder.
Installationtrunks
Theinstallationtrunkmaybefabricatedbytheinstallation
shipyard,orsuppliedbySimrad.Severaltypesareavailablewith
variouspitchcentrediameters(PCD).
Table2OptionalinstallationtrunksavailablefromSimrad
Trunktype
SpecicationsOrderno.
SX90/SX9120bolts,PCD620mmSP9-205825
SX92/SX9324bolts,PCD680mmSP9-207516
SX9516bolts,PCD540mmSQ4–042508
22
307531/C