Simrad SX90 - INSTALLATION REV C - Connect AC Mains to the Transceiver Unit

SimradSX90
ConnectACmainstotheTransceiverUnit
TheACmainscableisastandardcommercialitem.Itis
connectedtoasocketatthebottomoftheTransceiverUnit.If
theACmainsconnectoronthecabledoesnott,replaceitwith
asuitableconnector.
Procedure
ThisiscableSX90/C04.
1
ConnecttheACmainscablefromtheUninterrupted
PowerSupplyinthesonarroomtothebottomsocketon
theTransceiverUnit.Thisisastandardcommercialmains
cable.
Figure33TransceiverUnitACmainssocket(A)
Relatedtopics
•ACmainswithIEC320/C21onpage206
82
307531/C