Simrad SX90 - INSTALLATION REV C - Connect the Transceiver Unit to the Motor Control Unit; Motor Control Unit

Cablelayoutandinterconnections
ConnecttheTransceiverUnittotheMotor
ControlUnit
Procedure
ThisiscableSX90/C32.
1
Locatethe8metersterminatedEthernetpatchcable
providedwiththeTransceiverUnit.
2
ConnecttheEthernetcablefromtheEthernetsocket
undertheTransceiverUnittotheEthernetsocketonthe
MotorControlUnit.
Figure37TransceiverUnittoMotorControlUnitconnections
307531/C
87