Simrad SX90 - INSTALLATION REV C - Connect the Processor Unit to the Beamformer Unit

SimradSX90
ConnecttheProcessorUnittothe
BeamformerUnit
Procedure
ThisiscableSX90/C30.
1
Locatethe5meterreadilyterminatedEthernetcable
providedwiththeBeamformerUnit.
2
ConnecttheEthernetcablefromslotJ4ontherear
sideoftheProcessorUnittoslotJ4ontherearsideofthe
BeamformerUnit.
EachslotJ4providestwoEthernetconnector.Usethe
b
o t t o m connectorontheProcessorUnitandthet o p
connectorontheBeamformerUnit.
Figure30Connections
Relatedtopics
•RJ45Ethernet,straightonpage208
78
307531/C