Simrad SX90 - INSTALLATION REV C - How to Unpack the Hull Unit from Its Transport Box; Note

SimradSX90
•SX93:Thishullunithas1.6mstrokelength,anditis
designedformaximumspeed20knots.Itwilltonastandard
Simradtrunkwith680mmpitchcentrediameter.
•SX95:Thishullunithas1.0mstrokelength,anditis
designedformaximumspeed12knots.Itwilltonastandard
Simradtrunkwith540mmpitchcentrediameter.
Howtounpackthehullunitfromitstransportbox
Note
Thetransducerisprotectedtopreventdamageduringtransport
andhullunitinstallation.Thisprotectionmustremainattached
whilethehullunitisbeingmanoeuvredintothesonarroom.
Figure12Removingthehullunitfromitstransportbox
(CD015412B)
BB
C
A
ALiftingeyeonthehoistingunit
BMountinghardware(woodencradleandsupport
construction)
CTransducerprotection
Procedure
1Removethetopcoverofthewoodenbox.
2Toremovethefasteninghardware(B),pulloutthenails
markedwithIndianink.
3Ifyouwishtoreusetheboxtoholdtheoldhullunit,make
surethatyoukeepallthefasteninghardwareusedtosecure
thehullunitinthewoodenbox.
4Fastentheliftingtackletothetwoliftingeyebolts(A)
onthetopofthehoistingunitandliftthehullunit(with
thetransducerprotectioninplace)carefullyoutofthe
transportationbox.
44
307531/C