Simrad SX90 - INSTALLATION REV C - Connect AC Mains to the Colour Display

Cablelayoutandinterconnections
ConnectACmainstothecolourdisplay
TheACmainscableisastandardcommercialitem.IftheAC
mainsconnectoronthecabledoesnott,replaceitwitha
suitableconnector.
Procedure
ThisiscableSX90/C01.
1
ConnecttheACmainscablefromtheUninterrupted
PowerSupplyinthewheelhousetothecolourdisplay.This
isastandardcommercialmainscable.
2
Connectagroundingcabletothecolourdisplayifthis
isspeciedintheinstallationinstructionsprovidedbythe
manufacturer.
Relatedtopics
•ACmainswithIEC320/C21onpage206
307531/C
81