169
Cut: The cropping does not change during the transition,
and the cropping is removed after the transition has
completed.
Last 5%: T
he cropping is maintained for the first 95% of
the transition, and is removed during the last 5% of
the transition.
Linear: T
he cropping is removed from the start of the
transition through the course of the transition.
To set the timing of transition completion
When the [Last 5%] button in the [Crop Transition] group
i
s selected, you can set the transition completed timing to
70%, 95%, or 100% of the execution time.
In the [Release Transition] group, select the timing of
tra
nsition completion.
Last 30%: Th
e transition completes at the 70% point of
the transition progress. The transition interval from
70% to 95% becomes a dead band. The cropping is
removed during the last 5% of the transition.
Last 5%: The
transition completes at the 95% point of
the transition progress. The cropping is removed
during the remaining 5%.
Off: Th
e transition completes at the 100% point. During
the last 5% of the transition, the transition and
cropping removal proceed together.
t: Transition execution
time
y: Change in transition
and cropping amount
Transition
Crop
t: Transition execution
time
y: Change in transition
and cropping amount
Dead band
Transition
Crop
To Next Page
Loading...
