354
• The content name is the name of content 1 with
“_CMB” appended to the end.
If the name exceeds 64 characters, some characters at
t
he end of the content 1 name will be deleted.
• If content with the same name exists, a copy count
(
underscore and copy number) is added to the end.
• The tag properties of content 1 and content 2 are all
ad
ded.
• The memo property of content 1 is added.
Linking an image and audio
You can link audio content to video content or video
combined content.
The linked content is saved as new content. The original
c
ontent is not deleted.
1
Open the Home > Content > Combine/Separate >
Link Audio menu (10201.22).
Selection buttons for video content and audio content
are
shown on the left.
A list of content is shown on the right.
For details about the list display, see “Displaying
Content” (page 348).
Still image content is not displayed.
2
Press the [Video] button on the left.
3
Select video content from the list displayed on the
right.
The thumbnail and information for the selected
c
ontent is displayed on the [Video] button.
4
Press the [Audio] button on the left.
5
Select audio content from the list displayed on the
right.
The thumbnail (audio type icon) and information for
t
he selected content is displayed on the [Audio]
button.
6
Press the [Link Now] button.
To release the content selection
Press the [Clear] button.
7
Check the message, then press [OK].
The audio content is linked to the video content, and
t
he linked content is saved in the video content folder.
Name and properties of linked content
The name and properties of linked content are set
acc
ording to the following rules.
• The content name is the name of the video content with
“_L
NK” appended to the end.
If the name exceeds 64 characters, some characters at
th
e end of the video content name will be deleted.
• If content with the same name exists, a copy count
(
underscore and copy number) is added to the end.
• The tag properties of the video content and audio
cont
ent are all added.
• The memo property of the video content is added.
• The duration is the same as the video content.
Separating combined/linked content
Separated content is saved as new content. The original
content is not deleted.
1
Open the Home > Content > Combine/Separate >
Separate menu (10201.23).
A list of content is shown on the right.
For details about the list display, see “Displaying
Content” (page 348).
Only content that can be separated is displayed.
2
Select content from the list displayed on the right.
The thumbnail and information for the selected
c
ontent is displayed on the left.
3
Press the [Separate Now] button.
4
Check the message, then press [OK].
The content is separated and saved in the same folder.
Name and properties of separated content
The name and properties of separated content are set
accord
ing to the following rules.
• For combined content, the content name is the original
name wi
th “_V1” (content 1) and “_V2” (content 2)
appended to the end.
For linked content, the content name is the original
name
with “_A” (audio content), “_V1” (video content/
video combined content 1), and “_V2” (video
combined content 2) appended to the end.
If the name exceeds 64 characters, some characters at
t
he end of the combined/linked content name will be
deleted.
• If content with the same name exists, a copy count
(
underscore and copy number) is added to the end.
• The tag properties of the combined/linked content are
adde
d.
• The memo property of the combined/linked content is
adde
d.
Note
Note
To Next Page
Loading...
