Appendix (Volume 3)
1335
Error Messages
Error This operation is cancelled,
because the register is locked.
Please change the register
status to be unlocked first.
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store
>Edit
6411.1: Shotbox >Register >Store/Recall >Edit
In the above menu, an attempt was made to
assign to a register that is locked. Unlock the
register before carrying out the assignment.
The file was not able to be
read.
7142.1: File >Shotbox, Macro >File Edit
In the above menu, [Off Line Edit] was pressed
but the selected file could not be read.
Select the file again, and press [Off Line Edit]
once more.
It was not possible to make a
file.
7142.3: File >Shotbox, Macro >File Edit >Off
Line Edit
In the above menu, when storing, the file could
not be written.
Try the store once more.
Failed... 7162: File >All, External File >Import/Export
In the above menu, importing a file failed.
Check the format of the original file, and try
again.
The Source and the target are
the same directory.
Please change the source or
the target directory.
7172: File >Configure >Unit ID Copy
In the above menu, the same directory and ID
were selected for source and target.
Select a different directory and ID.
Extraction FM file auto extraction is
running (–9).
2542:Frame Memory >File >Auto Extraction
In the above menu, when the [Extraction Start]
button is pressed, this message appears if the
CG wipe extraction function is already being
executed.
FM 1394 HDD Backup or
Restore is processing. (–11).
2542:Frame Memory >File >Auto Extraction
In the above menu, when the [Extraction Start]
button is pressed, this message appears if the
external hard disk is already active in a frame
memory file data backup/restore operation.
FM DDR/VTR Backup/Restore
is running (–16).
2542:Frame Memory >File >Auto Extraction
In the above menu, when the [Extraction Start]
button is pressed, this message appears if a
backup/restore operation using the VTR/DDR is
in progress.
Extraction ERROR (–1). 2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if an internal
processing error occurs.
Create thumbnail failed (–2). 2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if thumbnail
creation failed (internal processing error).
Icon Title Message Description
To Next Page
Loading...
