Appendix (Volume 3)
1336
Error Messages
Extraction Red Symbol file not match
(–3).
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if a red marker
frame file is invalid.
Blue Symbol file not match
(–4).
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if a blue marker
frame file is invalid.
No data between two symbol
files (–5).
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if there is no
data between two marker frames.
Cannot find symbol file (–8). 2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if a marker
frame file was not found.
Clip frame error (–10). 2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if a clip frame
count is invalid (internal processing error).
Clip not found (–12). 2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if the specified
clip does not exist.
Clip is playing or being edited
(–13).
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if the specified
clip is being played back or edited.
Clip register error (–14). 2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if the specified
register number data cannot be processed
(internal processing error).
Can’t extract pair clip (–15). 2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if an attempt is
made to extract a pair clip.
Clip id not enough (–50). 2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if there are 100
clips or more.
Still frame on FM 2nd board (–
51).
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if a still image
was extracted from an external clip.
Clip frame number can’t be
ODD in 720P format (–9).
2542:Frame Memory >File >Auto Extraction
In the above menu, when [Extraction Start] is
pressed, this message appears if an odd
number of clips are extracted (720P format
only).
Icon Title Message Description
To Next Page
Loading...
