25Table of Contents
Chapter 20 Switcher Setup (Switcher)
Settings for Switcher Configuration (Config Menu).............................1202
Adjusting the Reference Phase..........................................................1203
Specifying the Video Switching Timing ...........................................1203
Setting the Operation Mode ..............................................................1203
Setting User Regions.........................................................................1206
Assigning PGM/PST Logically to an M/E........................................1207
Setting the Assignments of DME Channels to Use on the Individual M/E
Banks......................................................................................1207
Setting the Side Flag Video Material and Operation ........................1207
Signal Input Settings (Input Menu) ........................................................1210
Making Phase Adjustment and Through Mode Settings...................1210
Making Video Process Settings.........................................................1211
Enabling the Illegal Color Limiter ....................................................1212
Selecting Inputs to Apply the Format Converter (When Using the MVS-
8000G) ...................................................................................1212
Selecting the Format Converter Conversion (When Using the MVS-
8000G) ...................................................................................1213
Signal Output Settings (Output Menu) ..................................................1220
Assigning Output Signals ..................................................................1220
Setting the Reference Output ............................................................1221
Setting the Output Signal ..................................................................1222
Settings Relating to Video Switching (Transition Menu) .....................1227
Selecting the Bank to Make the Settings...........................................1227
Settings Relating to Keys, Wipes, Frame Memory and Color Correction
(Key/Wipe/FM/CCR Menu).........................................................1230
Switching Video Process Memory On or Off ...................................1231
Settings for the Show Key Function..................................................1231
Settings for Key Auto Drop Function ...............................................1231
Automatically Naming and Saving to Frame Memory .....................1232
Selecting the Bank to Make the Settings...........................................1232
Settings Relating to Function Links (Link Menu).................................1235
Setting a Cross-Point Button Link.....................................................1235
Making Link Table Settings ..............................................................1237
Linking Cross-Point Buttons and GPI Output Ports .........................1237
Making a Setting for Linking Two M/E Banks.................................1239
Making a Link Setting for Key Transition ........................................1241
Interfacing With External Devices (Device Interface Menu) ...............1243
Making 9-Pin Port Device Interface Settings....................................1243
To Next Page
Loading...
