26
Table of Contents
Making Switcher Processor GPI Input Settings ................................1244
Making Switcher Processor GPI Output Settings .............................1247
Enabling or Disabling AUX Bus Control..........................................1249
Setting the Interface Between the DME and the Switcher................1249
Setting the AUX Bus Output and Reentry Input...............................1250
Selecting the Mode for Turning Off Keys Upon Receiving the Editor
Command...............................................................................1251
Chapter 21 DME Setup (DME)
Settings Relating to Signal Inputs (Input Menu)...................................1254
Setting the Initial Crop ......................................................................1254
Setting an Illegal Color Limit for Matte Signals...............................1255
Making DME System Phase Adjustment..........................................1255
Setting the TBC Window Center Position ........................................1255
Settings Relating to Signal Outputs (Output Menu) .............................1257
Adjusting the DME1 and DME2 Output Video Clip Levels ............1257
Setting the Monitor Output................................................................1258
Interfacing With External Devices (Device Interface Menu) ...............1259
Making DME GPI Input Settings......................................................1260
Making DME GPI Output Settings ...................................................1262
Chapter 22 DCU Setup (DCU)
Setup Relating to DCU.............................................................................1264
Settings Relating to Parallel Inputs (Input Config Menu)....................1265
Assigning a GPI Input Port ...............................................................1265
Releasing the Assignment of a GPI Input Port..................................1266
GPI Input Setting (GPI Input Assign Menu).........................................1267
Making DCU GPI Input Settings ......................................................1267
Parallel Output Settings (Output Config Menu) ...................................1271
Assigning a GPI Output Port.............................................................1271
Releasing the Assignment of a GPI Output Port...............................1272
GPI Output Setting (GPI Output Assign Menu) ...................................1273
Making DCU GPI Output Settings....................................................1273
Serial Port Settings (Serial Port Assign Menu) .....................................1276
Making Serial Port Settings...............................................................1276
Making Detailed Settings on the External Device Connected to the Serial
Port .........................................................................................1278