Chapter 7 Frame Memory
395
Still Image Operations
6
To use a color matte signal for the input signal, press [Frgd Color], turning
it on.
Even when pair mode is enabled, you can make separate settings for each
FM.
7
Turn the knobs to adjust the following parameters.
8
If you turned [Frgd Color] off in step 6, if required press [Input Adjust] to
display the Input Adjust menu, and make the video process (see page 389)
and mask (see page 390) settings for the input signal.
9
To set the background signal to black, press [Bkgd Black], turning it on.
Notes
• When the background signal is originally black, [Bkgd Black] remains
on.
• When the background signal is a freeze image (an image frozen, but not
saved), turning [Bkgd Black] on erases the unsaved freeze image and, as
a result, [Bkgd Black] remains on.
10
In the <Type> group, set the type of combination (see page 396).
11
In the state in which you want to freeze, press one of the following in the
<Freeze> group, to write the freeze image to temporary memory.
Frame: Freeze one frame.
Field: Freeze one field.
Off: Release the freeze, and delete the recorded freeze image.
After carrying out the freeze, to return to the state immediately before the
freeze, press [Undo] in the <Freeze> group.
Notes
• All freeze images written to temporary memory are lost when the system is
powered off.
• If you change the frame memory to use as in step 2 before saving the freeze
images written to temporary memory, all the freeze images in temporary
memory are lost, unless the auto store function has been enabled in setup.
With the auto store function enabled, the freeze images written to temporary
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
To Next Page
Loading...
