Chapter 11 DME Operations
642
DME Special Effect Operations
• When Video is selected
.
• When Key is selected (with SDI-interfaced MVE-8000A/MVE-9000)
5
To cancel black level leaking that can occur at the edge of the screen when
the Defocus effect is enabled, press [Clean Defocus], turning it on.
Masking the Defocus effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see “Mask Settings” (page 657).
Notes
The Mask function is not supported on the MVE-8000.
Parameter group [2/2]
Knob Parameter Adjustment Settings values
1 Video H Horizontal defocusing of video
signal
0.00 to 100.00
2 Video V Vertical defocusing of video
signal
0.00 to 100.00
3 Key H Horizontal defocusing of key
signal
0.00 to 100.00
4 Key V Vertical defocusing of key signal 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 H Horizontal defocusing of video
signal
0.00 to 100.00
2 V Vertical defocusing of video
signal
0.00 to 100.00
3 All Horizontal and vertical
defocusing of video signal
H value shown
Knob Parameter Adjustment Settings values
1 H Horizontal defocusing of key
signal
0.00 to 100.00
2 V Vertical defocusing of key signal 0.00 to 100.00
3 All Horizontal and vertical
defocusing of key signal
H value shown
To Next Page
Loading...
