Chapter 16 Macros
946
Macro Operations in the Numeric Keypad Control Block and the Keyframe Control Block
• To specify a range to be deleted, press the [FROM TO] button in the
keyframe control block, then enter the event numbers from the numeric
keypad control block.
• To delete all events within this macro, press the [ALL] button, turning it
on.
3
Press the [DEL] button.
This deletes the specified events.
Moving events
1
Specify the edit point for the start of the range to be moved. (See page 943.)
2
To move multiple events simultaneously, press the [FROM TO] button in
the keyframe control block, then specify the range in the numeric keypad
control block.
3
Press the [DEL] button.
This temporarily deletes the specified events from the macro, and copies
them to the paste buffer.
4
Move to the edit point which is the destination within the macro to which
you want to move the events.
5
To paste the contents of the paste buffer after the edit point, press the
[PASTE] button in the keyframe control block.
To paste before the edit point, hold down the [SHIFT] button in the
keyframe control block and press the [PASTE] button.
This pastes the events from the paste buffer.
Copying events
1
Specify the edit point for the start of the range to be copied.
2
To copy multiple events simultaneously, press the [FROM TO] button or
[ALL] button in the keyframe control block, then specify the range in the
numeric keypad control block.
3
Press the [COPY] button.
This copies the specified events into the paste buffer.
To Next Page
Loading...
