Chapter 18 System Setup (System)
1052
Setting the Signal Format (Format Menu)
2
Click [Format converter].
The Format Converter menu appears.
3
To select the conversion format for format converter inputs 1 to 8, press
[Input 1-8 Format] in the <FC Input> group.
A pop-up window appears.
4
Press the button for the desired signal format.
5
To select the conversion format for format converter inputs 9 to 16, press
[Input 9-16 Format], then press the button for the desired signal format in
the <FC Input> group.
6
To set the output format for format converters 1 and 2, in the <FC Output>
group press [Output 1-2 Format], then press the button for the desired
format.
7
To set the output format for format converters 3 and 4, in the <FC Output>
group press [Output 3-4 Format], then press the button for the desired
format.
To delay unconverted input signals by one frame
For the format converter input signal, select the same format as the system
format.
Current settings of format converter
To Next Page
Loading...
