Chapter 14 Snapshots
857
Snapshot Operations in the Flexi Pad Control Block
Example: When you select bank 3, the register numbers allocated to the
memory recall section are as follows.
Operations with a simple type Flexi Pad control block
With a simple type Flexi Pad control block, the registers that can be handled
are numbers 1 to 8. Bank operations are therefore not possible. It is also not
possible to apply attributes, or to cancel a snapshot save or recall operation
once carried out.
To use registers 9 to 99, or to cancel a snapshot save operation, use the numeric
keypad control block.
Saving and Recalling Snapshots
Saving a snapshot in the Multifunction Flexi Pad control block
As an example, to save a snapshot on the M/E-1 bank, use the following
procedure.
Bank number Register numbers
Bank 0 1 to 10
Bank 1 11 to 20
Bank 2 21 to 30
Bank 3 31 to 40
Bank 4 41 to 50
Bank 5 51 to 60
Bank 6 61 to 70
Bank 7 71 to 80
Bank 8 81 to 90
Bank 9 91 to 99
To Next Page
Loading...
