Chapter 11 DME Operations
633
DME Special Effect Operations
Applying the Fade effect
1
In the DME menu, select VF7 ‘Enhanced Video Modify’ and HF3 ‘Dim &
Fade.’
The Dim & Fade menu appears.
2
Press [Fade], turning it on.
This enables the Fade effect.
3
Set the parameters.
Glow Settings
Applying the Glow effect
1
In the DME menu, select VF7 ‘Enhanced Video Modify’ and HF4 ‘Glow.’
The Glow menu appears.
2
Press [Glow], turning it on.
This enables the Glow effect.
Notes
• On the MVE-9000, the key border function and Glow function cannot be
turned on at the same time. The function most recently turned on is
effective.
• On the MVE-8000A, the Defocus and Glow effects or the Blur and Glow
effects cannot be turned on at the same time. The effect most recently
turned on is effective.
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Start Point where fading starts (fade
start point)
–100.00 to +100.00
2 Gain Degree of fading 0.00 to 100.00
To Next Page
Loading...
