Sony MVS -8000X - Operations Common to All DME Special Effects

Chapter 11 DME Operations
592
DME Special Effect Operations
Inversion of input signal
Key density adjustment
Adjusts the key density for the key signal input to the DME (see page 707).
Key source selection
Selects either the key signals received from the switcher or the key signals
generated in the DME for application to the front and back of the image (see
page 591 or page 707).
Color mix setting
This is a combination of two colors with a pattern generator. This color mix
signal can be used to fill parts such as a background or border (see page 619).
Operations Common to All DME Special Effects
In this section, explanations of the operating procedures for individual special
effects begin with selections from the DME menu. The following are common
operations that you must do prior to selecting from the DME menu.
1 In the device control block, select the target DME channel.
2 In the menu control block, select the top menu selection button [DME].
The DME menu appears.
Horizontal inversion Input signal Vertical inversion
Color 2
Color 1