Chapter 8 Color Backgrounds, Copy and Swap, and Other Settings
441
Misc Menu Operations
Misc Menu Operations
In the Misc menu, you can carry out the following operations.
• Enabling and disabling operation from an external device, System Manager,
or an editing keyboard.
• Enabling and disabling side flags on the background bus of each of the M/E-
1 to M/E-4 and PGM/PST banks.
For the side flag function, see “Side Flags” (page 474).
• Switching the safe title function on or off for each switcher output.
• Displaying the transition rate, independent key transition rate, and fade-to-
black transition rate for each of the M/E and PGM/PST banks, and changing
the settings.
Port Settings for Control From an External Device
Enabling or disabling control from an external device
1
In the menu control block, press the top menu selection button [MISC],
then select VF1 ‘Enable’ and HF1 ‘Port Enable.’
The Misc >Enable >Port Enable menu appears with the status area
showing the settings of the following ports.
• Switcher Remote1 to Remote4 ports (RS-422A, D-sub 9-pin)
• Switcher GPI port (parallel, 25-pin)
• DME1/DME2 Editor ports (RS-422A, D-sub 9-pin)
• DME1/DME2 GPI ports (parallel, 25-pin)
When the signal format is 1080P, you can also make settings for DME3/
DME4.
2
In the <Switcher> or <DME> group, press on the name of the port for
which you want to disable control from an external device, turning it off.
To re-enable control for the port, press on its name once more.
Notes
For the AUX bus operation from the Remote 1 to Remote 4 ports of the
switcher, the setting (Enable/Disable/Manual) in the Setup menu takes
precedence. Only when the setting is “Manual,” the settings made in the
Port Enable menu apply.
To Next Page
Loading...
