Sony MVS -8000X - Selecting Keys 5 to 8 for Next Transition

Appendix (Volume 1)
545
Using Keys 5 to 8
Selecting Keys 5 to 8 for Next Transition
To select keys 5 to 8 for the next transition, in addition to assigning [KEY5] to
[KEY8] for the operation, it is also possible to make the selection with [KEY1/
5], [KEY2/6], [KEY3/7], [KEY4/8], [SHIFT], and [ADD].
The following describes this method of operation.
Downstream
key control
block
Key delegation
buttons
7321.1 “Assigning the Key Delegation in the
Downstream Key Control Block”
Engineering Setup >Panel >Config >DSK
Fader Assign menu
Downstream
key/fade-to-
black control
block
Key delegation
buttons
7321.14 “Assigning Keys to the DSK1 and DSK2
Buttons in the Downstream Key/Fade-to-
Black Control Block”
Engineering Setup >Panel >Config >Link/
Program Button >DSK/FTB Module menu
Device
control block
(joystick)
Operating buttons 7321.31 “Selecting the Module to be the Reference for
Device Control Block”
Menu Engineering Setup >Panel >Config
>JS/TB User Setting menu
Device
control block
(trackball)
Control
block
Button Menu number Reference in User Guide
“Control Panel Setup (Panel)” and
“Cross-Point Settings (Xpt Assign
Menu)” in Chapter 19 (Volume3)
Buttons to which keys can be
assigned