Chapter 2 Menus and Control Panel
66
Names and Functions of Parts of the Control Panel
Key Control Block
Each of the M/E banks and the PGM/PST
bank includes eight keyers (for keys 1 to 8),
and you can delegate this control block to
any desired keyer. In this control block, you
can adjust and modify keys.
a Delegation buttons
Key delegation: Press one of the [KEY1]
to [KEY8] buttons to delegate the key
control block to the corresponding
keyer.
For details of assignment of keys 5 to 8,
see “Assigning Buttons for Selection of
Keys 5 to 8 in the Setup Menu” (page
544) in Appendix (Volume 1).
M/E delegation: Press one of the [M/E 1]
to [M/E 4], and [P/P] buttons to select
the bank (an M/E bank or the PGM/
3 Key fill/key source selection buttons
2 Key type selection buttons
1 Delegation buttons
4 Key modifier buttons
9 DME channel
selection buttons
7 Knobs
8 Displays
qf AUTO DELEG button
qa Output destination specification
buttons
qd TRACE button
qs OVERRIDE button
5 MORE button
6 SHOW KEY button
q; ON AIR indicators
qg RESIZER button
To Next Page
Loading...
