Chapter 19 Control Panel Setup (Panel)
1101
Overall Control Panel Settings (Config Menu)
Assigning Functions to Key Control Block Buttons
Select one of the four key control blocks installed in the main base and
extension, then assign functions to the 30 buttons.
1
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
2
Press [Key Control Module].
The Key Control Module menu appears.
3
Press one of [1st], [2nd], [3rd], and [4th], to select the key control block.
4
Press [Button Assign].
The assignment status of the control block you selected in step 3 above
appears.
5
Press the button to which you want to assign a function, displaying it in
reverse video.
6
Using any of the following methods, select the function you want to assign
from the Button Assign list.
• Press directly on the list.
To Next Page
Loading...
