Chapter 17 Files
993
Operations on Individual Files
Notes
• If you select [Register] in the operation device selection block, then with
[Still] or [All] select multiple files and change a file name, these still images
are converted to a clip.
• It is not possible to simultaneously select a file for which the Ext field in the
status area is empty and a file for which the Ext field shows “Ext” to change
the name.
• When the signal format is 1080P, a still image file name must be a maximum
of seven characters.
Deleting Files
You can delete data from the hard disk or memory card and snapshot or effect
data from a register. As an example, to delete a snapshot file, use the following
procedure.
1
In the File menu, select VF3 ‘Snapshot’ and HF1 ‘Snapshot.’
The Snapshot menu appears. The status area shows the device status, and
a list of files present on the device.
2
Press [File Edit].
A detailed list appears. Here too, you can select a device or specify a
directory. (See page 985.)
3
Using any of the following methods, select the file you want to delete.
• To select all files within the list, press [All] below the list.
• To select multiple files, turn the knobs to select in the following ranges.
• To select a single file, press the arrow keys to scroll the reverse video
cursor, or press directly on the list in the status area.
4
Press [Delete].
A confirmation message appears.
• Select “Yes” to delete.
• Select “No” to cancel the deletion.
Knob Parameter Adjustment Setting values
1 List Select the first file 1 to 99
3 Num Number to be selected 1 to 99
To Next Page
Loading...
