Chapter 13 Keyframe Effects
788
Recalling a Register
Recalling a Register
Use the numeric keypad control block or Multifunction Flexi Pad control block
to recall a register. For each region there are 99 registers dedicated to
keyframes, numbered from 1 to 99.
When creating an effect as a user programmable DME, use a 3-digit register
number which is commonly used for all DME regions (channels).
For a description of the concept of regions and registers, see “Regions” (page
766) and “Registers” (page 768).
The master timeline can also be recalled from the standard-type Flexi Pad
control block.
Recalling a register from the numeric keypad control block
Numeric keypad control block
1
Press the [EFF] button, turning it on.
This allocates the numeric keypad control block to keyframe operations,
and the [RCALL] button lights.
Display
Region selection buttons RCALL button
UNDO button
EFF button
To Next Page
Loading...
