Sony MVS -8000X - Fade to Black; Fade to Black Operation

Chapter 3 Signal Selection and Transitions
201
Fade to Black
Fade to Black
The PGM/PST bank provides a fade-to-black function, controlled with the
[FTB] button in the fade to black control block.
Notes
In multi-program mode or DSK mode, it is possible to carry out a fade-to-black
on a number of programs simultaneously.
You can also make a Setup menu setting such that a fade-to-black does not
apply to particular programs.
For details of the setting, see “Settings Relating to Video Switching (Transition
Menu)” in Chapter 20 (Volume 3).
Fade to Black Operation
Fade to black control block
Carrying out a fade to black
To carry out a fade to black, press the [FTB] button in the fade to black control
block.
The fade to black is carried out with the transition rate set for the program
output of the PGM/PST bank.
FTB button