Chapter 19 Control Panel Setup (Panel)
1149
Interfacing With External Devices (Device Interface Menu)
Notes
• This selection is possible when the BZS-8050 license is valid (see page
1062).
• A port to which Mixer ESAM-II is assigned is automatically set to Enbl, and
you cannot change this setting.
Sharing Disk Recorder/Extended VTR File Lists
To share files between devices connected to the same disk recorder/Extended
VTR, use the following procedure.
Notes
The following operation can only be carried out for the ports to which a disk
recorder or Extended VTR is assigned.
1
In the Panel >Device Interface >DCU Serial Port/MPE Assign menu,
select the target disk recorder/Extended VTR.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
a) The range of the setting value depends on the DCU port settings.
2
Turn the knob to select the device selection button (DEV1 to DEV12) for
sharing the file list.
3
Press [Same File List Set].
This is reflected in the file list in the status area.
4
Repeat steps 1 to 3 as required to select other devices for sharing the file
list.
Knob Parameter Adjustment Setting values
1 No Serial port selection
1 and upwards
a)
Knob Parameter Adjustment Setting values
2 File List Device selection button for
sharing the file list
1 to 12
To Next Page
Loading...
