Chapter 3 Signal Selection and Transitions
146
Signal Selection
Signal Selection
You carry out signal selection with the cross-point buttons in the cross-point
control block of each M/E bank or the PGM/PST bank, and the buttons in the
auxiliary bus control block.
The number of buttons in each cross-point row may be 16, 24, or 32, but here
the description is of the 32-button case as an example.
Cross-point control block
Source name displays
Key 2 row
Key 1 row
Reentry buttons
KEY4 button
KEY3 button
Cross-point buttons
Background A row
Background B row
Dedicated SHIFT button
Reentry buttons
UTIL button
To Next Page
Loading...
