Sony MVS -8000X - Executing Utilities with the Cross-Point Buttons in the Key 2 Row

Chapter 15 Utility/Shotbox
882
Utility Execution
• In the case of a function on/off action, the button you pressed lights
green, and this enables the function.
To disable the function, press the button once more.
• For other actions, the button you pressed momentarily lights green, and
then the function is executed.
Executing Utilities With the Cross-Point Buttons in the
Key 2 Row
You can use the key 2 row of each of the M/E-1 to M/E-4, and PGM/PST banks
in the same way as the buttons in the utility/shotbox control block.
Notes
To use this function, it is first necessary to assign the utility/shotbox mode
switching function to the control panel [PRE MCRO] button.
For details of the assignment operation, see “Assigning the Utility/Shotbox
Mode Switching Function” in Chapter 19 (Volume 3).
Cross-point control block in the PGM/PST block
You can assign any action to the cross-point buttons.
Key 2 row
Background A row
Background B row
Bank switching buttons
PRE MCRO button