Chapter 15 Utility/Shotbox
883
Utility Execution
For details of the assignment operation, see “Assigning a Function to the Key
2 Row Cross-Point Buttons” in Chapter 19 (Volume 3).
To execute the assigned action
When the action is executing a shotbox register, follow the procedure
“Executing a Shotbox Function With the Key 2 Row Cross-Point Buttons”
(page 897).
1
Press the [PRE MCRO] button, turning it on.
2
Press one of the bank switching buttons (see previous figure), to select the
bank.
These buttons correspond to banks 1 to 5 in sequence from the left.
3
Press the cross-point button to which the desired action is assigned.
This executes the action.
To Next Page
Loading...
