Chapter 14 Snapshots
876
Snapshot Operations in the Menus
Register name displays
For the same number, the register name for the M/E-1 region takes precedence.
If there is no data for the M/E-1 region, then the register name appears in the
sequence M/E-2 >P/P >User1 to User8 >DME ch1 to DME ch8 >RTR.
Operations in the Misc >Snapshot Menu
Recalling a snapshot
1
In the Misc menu, press [Snapshot].
The Snapshot menu appears.
2
As required, change the bank (see page 877).
3
Press the button for the number or name you want to recall.
This recalls the snapshot, and the button you pressed lights green.
Saving a snapshot
1
Display the Misc >Snapshot menu.
2
Set the state you want to save as a snapshot.
3
Press [Store].
The button lights amber.
4
As required, change the bank (see page 877).
To Next Page
Loading...
