Chapter 17 Files
985
Operations on Individual Files
In the Frame Memory menu, the following items are also shown.
Pair: In the case of a pair file, “P” is shown.
Ext: In the case of an extended clip file, “Ext” is shown.
Selecting Regions
You can carry out a file operation on a number of regions simultaneously.
However, a region selection is not required for the following files.
• Key memory
• Video process memory
• Shotbox
• Macro
• Macro attachment
• Frame memory
•Setup
• Initial status
In the above list, for setup and initial status, you can similarly separate the files
to be operated on by device in a way similar to the region selection.
To make a region selection
1
Press the region selection area at the top right of the screen (see page 984).
The region selection window appears.
2
Press the region names you do not want to select, turning them off.
3
Press [OK].
Selecting a Device for Operations
To carry out file operations, you need to specify the device holding the data (or
file), as one of the following: register, hard disk, memory card, and so on. You
can then further select a directory.
If you have enabled NFS (Network File System) in setup, you can add
“Network” to the device for operations.
If you specify “Network,” you can access System Manager through the
network for file saving and loading.
For details of the NFS settings, see “Making the Network Settings” in Chapter
18 (Volume 3).
To Next Page
Loading...
