Sony MVS -8000X - Recalling a Macro Register and Executing a Macro

Chapter 16 Macros
921
Macro Operations in the Standard Type Flexi Pad Control Block
When entering macro editing mode with “Full Editing” selected
About operations in Full Editing mode, see “Macro Operations in the Simple
Type Flexi Pad Control Block” (page 928).
Banks and registers
To allow operations on the 99 registers, the standard type Flexi Pad control
block treats the registers in groups. These groups are called banks, and there
are 10 banks, numbered from 0 to 9.
For details of the correspondence between banks and registers, see “Banks
and Registers” (page 856).
Recalling a Macro Register and Executing a Macro
Carrying out a macro operation in the normal mode
Use the following procedure to recall a macro register.
1 In the Flexi Pad control block, press the [MCRO] button, turning it on.
Numeric display
UNDO button
Bank selection buttons
Memory recall section
MCRO button
STORE STATS button