Chapter 11 DME Operations
668
DME Special Effect Operations
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
To make the tip of the swirl stardust
1
Press [Pixel], turning it on.
2
Set the following parameters.
Corner Pinning Settings
Notes
When the Brick effect is enabled, the Corner Pinning function cannot be used.
Setting the Foreground Corner Pinning positions
1
In the DME menu, select VF4 ‘Non Linear/Corner Pin’, HF2 ‘Corner
Pinning.’
The Corner Pinning menu appears.
2
Set [Corner Pinning] to On.
3
Set [Corner Marker] to On.
A marker appears for each corner. The marker for the selected corner is
distinguished from the other markers.
2 Expand Degree of expansion 0.00 to 100.00
3 Trans Angle Angle of slanting in effect region –8.000 to +8.000
4 Trail Angle Direction of trail –100.00 to +100.00
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 Density Degree to which image disappears 0.00 to 100.00
2 Random Trail type and amount of stardust 0.00 to 100.00
To Next Page
Loading...
