Sony MVS -8000X - Page 1099

Chapter 19 Control Panel Setup (Panel)
1099
Overall Control Panel Settings (Config Menu)
For details of the independent key transition control block (simple type), see
Chapter 2 (Volume 1).
The control panel comprises a main base for installing the principal switcher
bank control blocks, and an extension section for extended control blocks. The
independent key transition control block (simple type) can be installed in
either, but the assignable keys differ as follows.
When the independent key transition control block (simple type) is
installed in the main base
Select the keys to be assigned from the following.
• Key1,2 (keys 1 and 2)
1)
• Key3,4 (keys 3 and 4)
1)
• Key5, 6 (keys 5 and 6)
1)
• Key7, 8 (keys 7 and 8)
1)
1) The M/E bank depends on the settings in the M/E Assign menu where the independent key
transition control block is installed.
• DSK1,2 (downstream keys 1 and 2)
• DSK3,4 (downstream keys 3 and 4)
• DSK5, 6 (downstream keys 5 and 6)
• DSK7, 8 (downstream keys 7 and 8)
• N/A (no assignment)
When the independent key transition control block (simple type) is
installed in the extension section
Select the keys to be assigned from the following.
• M/E-1 Key1,2
• M/E-1 Key3,4
• M/E-1 Key5, 6
• M/E-1 Key7, 8
• M/E-2 Key1,2
• M/E-2 Key3,4
• M/E-2 Key3, 4
• M/E-2 Key5, 6
• M/E-2 Key7, 8
• M/E-3 Key1, 2
• M/E-3 Key3, 4
• M/E-3 Key5, 6
• M/E-3 Key7, 8
• M/E-4 Key1, 2
• M/E-4 Key3, 4
• M/E-4 Key5, 6
• M/E-4 Key7, 8
•DSK1, 2
•DSK3, 4
•DSK5, 6
•DSK7, 8