Chapter 20 Switcher Setup (Switcher)
1203
Settings Relating to Function Links (Link Menu)
a) The keys and their numbers selectable as link source/link destination are as follows.
M/E-x Keyx?DSKx
(In M/E-x, the x is the M/E bank number (1 to 4); in DSKx the x is the DSK number (1
to 8); in Keyx the x is the key number (1 to 8)).
5
In the <Key Select> group, select [Linked Key] (link destination).
6
In the same way as in step 4, select the key you want to be the link
destination, then press [Key Set].
To release the link setting
Use the same operation as in step 2 to select the link number for which you
want to release the link setting, then press [Clear].
To Next Page
Loading...
