Chapter 3 Signal Selection and Transitions
190
Transition Preview
Notes
• During a transition, whether executed with the [AUTO TRANS] button or
the fader lever, it is not possible to press the [TRANS PVW] button.
• In bus fixed mode (see page 187), transition previews are not available.
• When using the simple-type transition control block (see page 203),
transition previews are not available.
Hold Normal Hold
One Time One Time –
Transition Preview
mode
Switcher setup
(Transition menu)
<Transition Preview> group
Panel setup
(Operation >Custom Button
menu)
<Trans Pvw> group
To Next Page
Loading...
