Chapter 4 Keys
238
Key Setting Operations Using Menus
• When turning [Multi] on and replicating the pattern
a) See page 311.
• When turning [Aspect] on and setting the aspect ratio of the pattern
a) See page 310.
• When turning [Angle] on in the <Rotation> group and inclining the
pattern
a) See page 308.
• When turning [Speed] on in the <Rotation> group and rotating the
pattern at a constant speed
a) See page 309.
6
To interchange color 1 and color 2, press [Color Invert], turning it on.
Applying the zabton effects
1
In the Edge menu, press [Zabton], turning it on.
2
Adjust the following parameters.
Knob Parameter Adjustment Setting values
1 H Multi Number of repetitions of pattern
horizontally
1 to 63
2 V Multi Number of repetitions of pattern
vertically
1 to 63
3 Invert Type Replication layout
1 to 4
a)
Knob Parameter Adjustment Setting values
1 Aspect Aspect ratio
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Angle Angle of pattern rotation
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Speed Rotation rate of pattern
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Size Pattern size 0.00 to 100.00
2 Soft Pattern edge softness 0.00 to 100.00
3 Density Density 0.00 to 100.00
To Next Page
