Chapter 4 Keys
241
Key Setting Operations Using Menus
5
To invert the black and white sense of the mask source, press the [Mask
Invert] button, turning it on.
6
When a pattern is selected as the mask source, set the pattern modifiers as
required.
• When turning [Position] on and setting the pattern position
a) See page 306.
• When turning [Multi] on and replicating the pattern
a) See page 311.
• When turning [Aspect] on and setting the aspect ratio of the pattern
a) See page 310.
• When turning [Angle] on in the <Rotation> group and setting the
angle of the pattern rotation
a) See page 308.
Knob Parameter Adjustment Setting values
1 Size Pattern size 0.00 to 100.00
2 Soft Edge softness 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Position H Horizontal position
–200.00 to +200.00
a)
2 Position V Vertical position
–200.00 to +200.00
a)
Knob Parameter Adjustment Setting values
1 H Multi Number of repetitions of pattern
horizontally
1 to 63
2 V Multi Number of repetitions of pattern
vertically
1 to 63
3 Invert Type Replication layout
1 to 4
a)
Knob Parameter Adjustment Setting values
1 Aspect Aspect ratio
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Angle Pattern angle
–100.00 to +100.00
a)
To Next Page
