Sony MVS -8000X - Page 252

Chapter 4 Keys
252
Key Setting Operations With the Key Control Block
• When the [PTN] button is lit green
Selecting key fill
Select whether to use a color matte as key fill, or the signal on the key fill bus.
When using a color matte: Press the [MATTE FILL] button, setting it on. The
button lights green, and you can now set the parameters with the knobs.
When [Mix Color] is selected in the key fill Matte Adjust menu, you can
further adjust color 2.
When [Mix Color] is on, and the [MORE] button is lit amber
When [Mix Color] is on, and the [MORE] button is lit green
When using the key fill bus signal: Press the [MATTE FILL] button, turning
it off.
To select the key fill signal, use the key 1 or key 2 bus buttons in the cross-
point control block.
For the CCP-6224/6324 Control Panel, it is necessary to set the [AUX
CTRL] button to Off in order to exit the AUX panel-less function (see page
151).
Knob Parameter Adjustment Setting values
1 Size Pattern size 0 to 100
2 Soft Edge softness 0 to 100
3 Density Key density 0 to 100
Knob Parameter Adjustment Setting values
1 Luminance Color 1 luminance 0 to 100
2 Saturation Color 1 saturation 0 to 100
3 Hue Color 1 hue 359 to 0
Knob Parameter Adjustment Setting values
1 Luminance Color 1 luminance 0 to 100
2 Saturation Color 1 saturation 0 to 100
3 Hue Color 1 hue 359 to 0
4 Size Pattern size 0 to 100
Knob Parameter Adjustment Setting values
1 Luminance Color 2 luminance 0 to 100
2 Saturation Color 2 saturation 0 to 100
3 Hue Color 2 hue 359 to 0
4 Soft Edge softness 0 to 100