Chapter 4 Keys
264
Key Adjustment Operations With the Multifunction Flexi Pad Control Block
1
In the Multifunction Flexi Pad control block mode selection buttons press
[KEYADJ].
2
Press the [M/E1] region selection button.
3
Press the [KEY SHIFT] button, turning it off.
4
In the memory recall section, press the [KEY1] button.
Notes
To select keys 5 to 8, in step 3 press [KEY SHIFT], turning it on, then press
one of buttons [KEY5] to [KEY8] in the memory recall section to select
the key.
The button displays in the memory recall section now appear as shown in
the following illustration.
Pressing the [PAGE 1/3] >[PAGE 2/3] buttons further changes the display
as follows, then pressing [PAGE 3/3] returns to the original display shown
in the illustration.
To Next Page
Loading...
