Sony MVS -8000X - Page 332

Chapter 5 Wipes
332
Wipe Pattern Operations in the Multifunction Flexi Pad Control Block
Wipe pattern edge setting buttons
BDR (border): Applies a border to the wipe pattern.
SOFT BDR (soft border): Softens the applied border.
SOFT (soft edge): Softens the edge.
EDGE MAT (edge matte): Selects whether to fill the edge with a color matte,
or insert an image from the utility bus. By default a color matte is selected.
You can adjust the parameters selected with these buttons using the control
knobs, when the button is lit green.
• When border is selected
• When soft border is selected
Parameter group [1/2]
Knob Parameter Adjustment Setting values
1 W Border width 0 to 100
Parameter group [2/2]
Knob Parameter Adjustment Setting values
1 L Luminance 0 to 100
2 S Saturation 0 to 100
3 H Hue 359 to 0
Parameter group [1/2]
Knob Parameter Adjustment Setting values
1 W Border width 0 to 100
2 I Degree of softening of
inside of border
0 to 100