Chapter 6 DME Wipes
344
Overview
At the first transition completion point, if you move the image with the
positioner, the transition appears as in the following figure.
Transition mode “frame in-out V”
This mode is specified when creating a transition effect in the vertical
direction.
In this mode, in the state at completion of the first transition, you can move the
image with the positioner in both horizontal and vertical directions. The image
at the transition start point and end point also moves.
The description is of an example of creating an effect such as the following.
Transition start Transition end
First transition
completion point
Image created
by interpolation
Background B
Background A
Effect execution
State before
modification
Image created
by interpolation
Background B
Background A
Transition start Transition end
First transition
completion point
Effect execution
To Next Page
Loading...
