Chapter 11 DME Operations
582
DME Special Effect Operations
Effects for entire image
Effects for video image
Name Effect/Image
Defocus
(See page 621.)
Defocuses the whole image. The degree of defocusing can be set
simultaneously for video and key signals or only for video signals. You can
also cancel the black level leaking that occurs at the edge of the screen when
the Defocus effect is used.
Blur
(See page 623.)
Applies a rounded blurring to the whole image.
Multi Move
(See page 623.)
Shrinks the image and lines up a number of copies vertically and horizontally.
You can specify the center point of the shrinking, the shrinking ratio, and the
aspect ratio of the image screen.
Name Effect/Image
Sepia
(See page 624.)
Overlays a specified color onto the image. You can adjust the sepia color that
is overlaid, and specify the degree of mixing between the original image and
the sepia image.
Mono
(See page 625.)
Converts the image into a monochrome image.
Posterization
(See page 626.)
Coarsens the luminance gradations of the image, for a paintinglike effect.
Solarization
(See page 626.)
Coarsens the chroma gradations of the image, for a paintinglike effect.
To Next Page
Loading...
