Sony MVS -8000X - Page 657

Chapter 11 DME Operations
657
DME Special Effect Operations
To apply the Multi Mirror effect
With the Multi Mirror menu displayed, set the following parameters.
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
To set the center position of original image
1 Press [Position], turning it on.
2 Set the following parameters.
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
Kaleidoscope settings
You can set the number of blocks, the partition reference point and angle,
horizontal and vertical offsets, a reflection position, and other parameters.
To apply the Kaleidoscope effect
With the Kaleidoscope menu displayed, set the following parameters.
Knob Parameter Adjustment Setting values
1 Interval H Horizontal distance between
mirrors (original width)
0.000 to 10.000
a)
0.000 to 40.000
b)
2 Offset H Amount of horizontal offset of
image with mirrors fixed
–4.000 to +4.000
a)
–16.000 to +16.000
b)
3 Interval V Vertical distance between mirrors
(original width)
0.000 to 10.000
a)
0.000 to 40.000
b)
4 Offset V Amount of vertical offset of image
with mirrors fixed
–4.000 to +4.000
a)
–16.000 to +16.000
b)
5 Angle Mirror angle –8.000 to +8.000
Knob Parameter Adjustment Setting values
1 H Horizontal original image center
position
–4.000 to +4.000
a)
–16.000 to +16.000
b)
2 V Vertical original image center
position
–4.000 to +4.000
a)
–16.000 to +16.000
b)
Knob Parameter Adjustment Setting values
1 Number Number of blocks 0.00 to 100.00
2 Phase Angle of partition reference point
–8.000 to +8.000
3 Offset H Amount of horizontal offset
–4.000 to +4.000
a)
–16.000 to +16.000
b)