Chapter 11 DME Operations
675
DME Special Effect Operations
a) For SD 4:3 and SD 16:9
b) For HD 4:3
c) For HD 16:9
Setting the color of the shade in the shade area
1
Turn [Shade Color] on.
2
Adjust the following parameters.
Setting the bar mode of the highlight area
When you select [Bar] in step 3 of “Applying the Lighting effect” (see page
672), use the following procedure to set the bar mode of the highlight area.
Notes
The bar mode of the highlight area is not supported on the MVE-8000A.
1
Select the mode in the <Bar Light Mode> group.
Normal: Emphasizes the bar highlight area.
Specular: An effect like light striking a surface with metallic reflections.
Mat: An effect like light striking paper, cloth, or another diffusively
reflective surface.
2
Set the following parameters.
Knob Parameter Adjustment Setting values
1 X X-value of bar center point
–8.00 to +8.00
a)
–24.00 to +24.00
b)
–32.00 to +32.00
c)
4 Width Width of bar 0.00 to 100.00
5 Soft Softness of edges 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Intensity Intensity of diffuse light area 0.00 to 100.00
To Next Page
Loading...
