Chapter 11 DME Operations
691
DME Special Effect Operations
FRGD: The light strikes the image foreground.
BKGD: The light strikes the image background.
Both: The light strikes both foreground and background.
Surface Flat
For the currently selected light source only, you can forcibly make the image
surface effect flat.
This is effective when you have selected texture as image surface effect and
want a flat effect for one light source only.
Light shape
Creates the light shape.
• Select the shape pattern
For shape patterns, see “Shape Patterns” (page 1013).
• Set the size, degree of deformation, softness, and rotation.
Ring settings
Shines the light with a hole in the middle, like a doughnut. Adjust the following
parameters.
Offset: Distance to move the center of the ring from the initial position (the
position set when selecting the light source in the <Spot Mode> group).
Radius: Inner side radius of the ring.
Angle: When an Offset is set, the rotation angle of the ring around the initial
center position.
No effect
Background
Foreground
Spotlight
FRGD selected BKGD selected Both selected
To Next Page
Loading...
